#if !defined(_OLERRORS_)
#define _OLERRORS_ /* Include error codes if not already included*/
/*-----------------------------------------------------------------------
Copyright (C) 1992-93. Data Translation, Inc., 100 Locke Drive,
Marlboro Massachusetts 01752-1192.
All rights reserved. This software is furnished to purchaser under a
license for use on a single computer system and can be copied (with
the inclusion of DTI's copyright notice) only for use in such system,
except as may be otherwise provided in writing by Data Translation,
Inc., 100 Locke Drive, Marlboro, Massachusetts 01752-1192.
The information in this document is subject to change without notice
and should not be construed as a commitment by Data Translation, Inc.
Data Translation, Inc. assumes no responsibility for any errors that
may appear in this document.
Data Translation cannot assume any responsibility for the use of any
portion of this software on any equipment not supplied by Data
Translation, Inc.
FILE NAME: olerrors.h
ABSTRACT:
This unit contains Error code declarations for the
DT Open Layers Data Acquisition and Memory Manager
10/13/92
12/8/94
jrw changed single line comment to std comments for
port to C50
---------------------------------------------------------------------------*/
#define OLIWBASE ((ECODE)0)
#define OLNOERROR OLIWBASE /* No Error*/
#define OLBADCAP OLIWBASE+1 /* Invalid capability specified*/
#define OLBADELEMENT OLIWBASE+2 /* Invalid element specified*/
#define OLBADSUBSYSTEM OLIWBASE+3 /* Invalid subsystem specified*/
#define OLNOTENOUGHDMACHANS OLIWBASE+4 /* Not Enough DMA Channels*/
#define OLBADLISTSIZE OLIWBASE+5 /* Invalid List Size*/
#define OLBADLISTENTRY OLIWBASE+6 /* Invalid List Entry*/
#define OLBADCHANNEL OLIWBASE+7 /* Invalid Channel*/
#define OLBADCHANNELTYPE OLIWBASE+8 /* Invalid Channel Type*/
#define OLBADENCODING OLIWBASE+9 /* Invalid Encoding*/
#define OLBADTRIGGER OLIWBASE+10 /* Invalid Trigger*/
#define OLBADRESOLUTION OLIWBASE+11 /* Invalid Resolution*/
#define OLBADCLOCKSOURCE OLIWBASE+12 /* Invalid Clock source*/
#define OLBADFREQUENCY OLIWBASE+13 /* Invalid Frequency */
#define OLBADPULSETYPE OLIWBASE+14 /* Invalid Pulse Type*/
#define OLBADPULSEWIDTH OLIWBASE+15 /* Invalid Pulse Width*/
#define OLBADCOUNTERMODE OLIWBASE+16 /* Invalid Counter Mode*/
#define OLBADCASCADEMODE OLIWBASE+17 /* Invalid Cascade Mode*/
#define OLBADDATAFLOW OLIWBASE+18 /* Invalid Data Flow*/
#define OLBADWINDOWHANDLE OLIWBASE+19 /* Invalid Window Handle*/
#define OLSUBSYSINUSE OLIWBASE+20 /* Subsystem in use*/
#define OLSUBSYSNOTINUSE OLIWBASE+21 /* Subsystem not in use*/
#define OLALREADYRUNNING OLIWBASE+22 /* Subsystem already running*/
#define OLNOCHANNELLIST OLIWBASE+23 /* No channel list*/
#define OLNOGAINLIST OLIWBASE+24 /* No gain list*/
#define OLNOFILTERLIST OLIWBASE+25 /* No filter list*/
#define OLNOTCONFIGURED OLIWBASE+26 /* Subsystem Not configured*/
#define OLDATAFLOWMISMATCH OLIWBASE+27 /* Data flow mismatch*/
#define OLNOTRUNNING OLIWBASE+28 /* Subsystem not running*/
#define OLBADRANGE OLIWBASE+29 /* Invalid Range*/
#define OLBADSSCAP OLIWBASE+30 /* Invalid Subsystem Capability*/
#define OLBADDEVCAP OLIWBASE+31 /* Invalid Device Capability*/
#define OLBADRANGEINDEX OLIWBASE+32 /* Invalid Range Index*/
#define OLBADFILTERINDEX OLIWBASE+33 /* Invalid Filter Index*/
#define OLBADGAININDEX OLIWBASE+34 /* Invalid Gain Index*/
#define OLBADWRAPMODE OLIWBASE+35 /* Invalid Wrap Mode*/
#define OLNOTSUPPORTED OLIWBASE+36 /* Not Supported*/
#define OLBADDIVIDER OLIWBASE+37 /* Invalid Divider Value*/
#define OLBADGATE OLIWBASE+38 /* Invalid Gate*/
#define OLBADDEVHANDLE OLIWBASE+39 /* Invalid Device Handle*/
#define OLBADSSHANDLE OLIWBASE+40 /* Invalid Subsystem Handle*/
#define OLCANNOTALLOCDASS OLIWBASE+41 /* Cannot allocate DASS*/
#define OLCANNOTDEALLOCDASS OLIWBASE+42 /* Cannot Deallocate DASS*/
#define OLBUFFERSLEFT OLIWBASE+43 /* Transfer list not empty*/
#define OLBOARDRUNNING OLIWBASE+44 /* Another Subsystem on board is already running */
#define OLINVALIDCHANNELLIST OLIWBASE+45 /* Channel list has been filled incorrectly*/
#define OLINVALIDCLKTRIGCOMBO OLIWBASE+46 /* Selected clock & trigger source may not be used together*/
#define OLCANNOTALLOCLUSERDATA OLIWBASE+47 /* Driver could not allocate needed memory */
#define OLCANTSVTRIGSCAN OLIWBASE+48 /* Triggered Scan not available in single value mode */
#define OLCANTSVEXTCLOCK OLIWBASE+49 /* External Clock is not available in single value mode*/
#define OLBADRESOLUTIONINDEX OLIWBASE+50 /* Bad Resolution Selected*/
#define OLADTRIGERR OLIWBASE+60 /* A/D Trigger Error*/
#define OLADOVRRN OLIWBASE+61 /* A/D Overrun Error*/
#define OLDATRIGERR OLIWBASE+62 /* D/A Trigger Error*/
#define OLDAUNDRRN OLIWBASE+63 /* D/A Underrun Error*/
#define OLNOREADYBUFFERS OLIWBASE+64 /* No Ready Buffers*/
#define OLBADCPU OLIWBASE+65 /* Library Requires i386 or i486*/
#define OLBADWINMODE OLIWBASE+66 /* Library Requires Windows 3.x Enhanced mode*/
#define OLCANNOTOPENDRIVER OLIWBASE+67 /* Driver cannot be initialized*/
#define OLBADENUMCAP OLIWBASE+68 /* Cannot enumerate this capability*/
#define OLBADDASSPROC OLIWBASE+69 /* Dass Proc CallBack NUL*/
#define OLBADENUMPROC OLIWBASE+70 /* Enum Proc CallBack NULL*/
#define OLNOWINDOWHANDLE OLIWBASE+71 /* No Window Handle*/
#define OLCANTCASCADE OLIWBASE+72 /* Subsystem cannot be cascaded */
#define OLINVALIDCONFIGURATION OLIWBASE+73 /* Invalid configuration in SYSTEM.INI*/
#define OLCANNOTALLOCJUMPERS OLIWBASE+74 /* Cannot allocate memory for jumpers*/
#define OLCANNOTALLOCCHANNELLIST OLIWBASE+75 /* Cannot allocate channel list*/
#define OLCANNOTALLOCGAINLIST OLIWBASE+76 /* Cannot allocate gain list*/
#define OLCANNOTALLOCFILTERLIST OLIWBASE+77 /* Cannot allocate filter list*/
#define OLNOBOARDSINSTALLED OLIWBASE+78 /* No DT-Open Layers boards intalled*/
#define OLINVALIDDMASCANCOMBO OLIWBASE+79 /* Invalid DMA / Scan combination*/
#define OLINVALIDPULSETYPE OLIWBASE+80 /* Invalid pulse type*/
#define OLINVALIDGAINLIST OLIWBASE+81 /* Invalid gain list*/
#define OLWRONGCOUNTERMODE OLIWBASE+82 /* Wrong counter mode*/
#define OLLPSTRNULL OLIWBASE+83 /* LPSTR passed as a parameter was NULL*/
#define OLINVALIDPIODFCOMBO OLIWBASE+84 /* Invalid Polled I/O combination*/
#define OLINVALIDSCANTRIGCOMBO OLIWBASE+85 /* Invalid Scan / Trigger combo*/
#define OLBADGAIN OLIWBASE+86 /* Invalid Gain*/
#define OLNOMEASURENOTIFY OLIWBASE+87 /* No window handle specified for frequency measurement*/
#define OLBADCOUNTDURATION OLIWBASE+88 /* Invalid count duration for frequency measurement*/
#define OLBADQUEUE OLIWBASE+89 /* Invalid queue type specified*/
#define OLBADRETRIGGERRATE OLIWBASE+90 /* Invalid Retrigger Rate for channel list size*/
#define OLCOMMANDTIMEOUT OLIWBASE+91 /* No Command Response from Hardware*/
#define OLCOMMANDOVERRUN OLIWBASE+92 /* Hardware Command Sequence Error*/
#define OLDATAOVERRUN OLIWBASE+93 /* Hardware Data Sequence Error*/
#define OLCANNOTALLOCTIMERDATA OLIWBASE+94 /* Cannot allocate timer data for driver */
#define OLBADHTIMER OLIWBASE+95 /* Invalid Timer handle*/
#define OLBADTIMERMODE OLIWBASE+96 /* Invalid Timer mode*/
#define OLBADTIMERFREQUENCY OLIWBASE+97 /* Invalid Timer frequency*/
#define OLBADTIMERPROC OLIWBASE+98 /* Invalid Timer callback procedure*/
#define OLBADDMABUFFERSIZE OLIWBASE+99 /* Invalid Timer DMA buffer size*/
#define OLBADDIGITALIOLISTVALUE OLIWBASE+100 /* Illegal synchronous digital I/O value requested.*/
#define OLCANNOTALLOCSSLIST OLIWBASE+101 /* Cannot allocate simultaneous start list*/
#define OLBADSSLISTHANDLE OLIWBASE+102 /* Illegal simultaneous start list handle specified.*/
#define OLBADSSHANDLEONLIST OLIWBASE+103 /* Invalid subsystem handle on simultaneous start list.*/
#define OLNOSSHANDLEONLIST OLIWBASE+104 /* No subsystem handles on simultaneous start list.*/
#define OLNOCHANNELINHIBITLIST OLIWBASE+105 /* The subsystem has no channel inhibit list.*/
#define OLNODIGITALIOLIST OLIWBASE+106 /* The subsystem has no digital I/O list.*/
#define OLNOTPRESTARTED OLIWBASE+107 /* The subsystem has not been prestarted.*/
#define OLBADNOTIFYPROC OLIWBASE+108 /* Invalid notification procedure*/
#define OLBADTRANSFERCOUNT OLIWBASE+109 /* Invalid DT-Connect transfer count*/
#define OLBADTRANSFERSIZE OLIWBASE+110 /* Invalid DT-Connect transfer size*/
#define OLCANNOTALLOCINHIBITLIST OLIWBASE+111 /* Cannot allocate channel inhibit list*/
#define OLCANNOTALLOCDIGITALIOLIST OLIWBASE+112 /* Cannot allocate digital I/O list*/
#define OLINVALIDINHIBITLIST OLIWBASE+113 /* Channel inhibit list has been filled incorrectly*/
#define OLSSHANDLEALREADYONLIST OLIWBASE+114 /* Dass handle is already on simultaneous start list */
#define OLCANNOTALLOCRANGELIST OLIWBASE+115 /* Cannot allocate range list*/
#define OLNORANGELIST OLIWBASE+116 /* No range list*/
#define OLNOBUFFERINPROCESS OLIWBASE+117 /* No buffers in process*/
#define OLREQUIREDSUBSYSINUSE OLIWBASE+118 /* Additional required sub system in use*/
#define OLWRAPMODEMISMATCH OLIWBASE+119 /* Wrap mode mismatch*/
#define OLVXDNOTINSTALLED OLIWBASE+120 /* VDTDAD virtual device driver not loaded*/
#define OLBADRETRIGGERMODE OLIWBASE+121 /* Invalid Retrigger Mode*/
#define OLBADCOUNT OLIWBASE+122 // Invalid count. Count exceeds maximum # of scans of the CGL.
#define OLBADRETRIGGER OLIWBASE+123 // Invalid Retrigger
#define OLBADPRETRIGGER OLIWBASE+124 // Invalid Pretrigger
#define OLBMBASE ((ECODE)200)
#define OLCANNOTALLOCBCB OLBMBASE+0 /* Cannot allocate a buffer control block for the requested data buffer.*/
#define OLCANNOTALLOCBUFFER OLBMBASE+1 /* Cannot allocate the requested data buffer.*/
#define OLBADBUFFERHANDLE OLBMBASE+2 /* Invalid buffer handle (HBUF) passed to a library from an application.*/
#define OLBUFFERLOCKFAILED OLBMBASE+3 /* The data buffer cannot be put to a section because it cannot be properly locked.*/
#define OLBUFFERLOCKED OLBMBASE+4 /* Buffer Locked*/
#define OLBUFFERONLIST OLBMBASE+5 /* Buffer on List*/
#define OLCANNOTREALLOCBCB OLBMBASE+6 /* Reallocation of a buffer control block was unsuccessful.*/
#define OLCANNOTREALLOCBUFFER OLBMBASE+7 /* Reallocation of the data buffer was unsuccessful.*/
#define OLBADSAMPLESIZE OLBMBASE+8 /* Bad Sample Size*/
#define OLCANNOTALLOCLIST OLBMBASE+9 /* Cannot Allocate List*/
#define OLBADLISTHANDLE OLBMBASE+10 /* Bad List Handle*/
#define OLLISTNOTEMPTY OLBMBASE+11 /* List Not Empty*/
#define OLBUFFERNOTLOCKED OLBMBASE+12 /* Bufffer Not Locked*/
#define OLBADDMACHANNEL OLBMBASE+13 /* Invalid DMA Channel specified*/
#define OLDMACHANNELINUSE OLBMBASE+14 /* Specified DMA Channel in use*/
#define OLBADIRQ OLBMBASE+15 /* Invalid IRQ specified*/
#define OLIRQINUSE OLBMBASE+16 /* Specififed IRQ in use*/
#define OLNOSAMPLES OLBMBASE+17 /* Buffer has no valid samples*/
#define OLTOOMANYSAMPLES OLBMBASE+18 /* Valid Samples cannot be larger than buffer*/
#define OLBUFFERTOOSMALL OLBMBASE+19 /* Specified buffer too small for requested copy operation*/
#endif
e-REdING. Biblioteca de la Escuela Superior de Ingenieros de Sevilla.
